Drytech offers a full range of waveguide pressurization components and systems, ranging from the desiccant dehydrator cartridge to a fully integrated waveguide pressurization/purging system. Drytech exceeds the rigorous challenges of moisture management for mechanical airborne and ground based radars. The Drytech, Inc. Airborne Waveguide Pressurization System (AWPS) is designed to utilize ambient air in order to provide the radar waveguide with a pressurized, dry, contaminant free and deionized air source to eliminate the possibility of arcing and corrosion within the waveguide.
The AWPS can also be utilized to provide an electronics enclosure or sensor pod with the same high quality air source to keep the enclosure free of contaminants and moisture frequently found in desolate operating environments as well as on various flight lines. These systems have been developed to create an initial purge of air at -60°C or better Dew Point, while also supplying a continuous flow of equal quality air in order to compensate for any inevitable system leaks. The Drytech, Inc. AWPS has a maintainer-friendly replaceable dehydrator cartridge specifically designed to ensure fault-free indication and ease of replacement. Each Series are available with an optional Built-in-Test (BIT) as well as RS422, ARINC-429 and Ethernet connections. For any information on how to integrate one of these Series into your system please reach out to Drytech, Inc. at (609) 758-1794.
System Specification
- Output Pressure settable up to 17psia
- Output Dew Point of -60°C or better
- Max Flow Rate of 10 SLPM
- 28VDC Input Power
- Disposable Dehydrator Cartridge – 200 Flight Hour life
- MIL-STD-310 “One-Percent” Conditions @ 10SLPM
Series 1
- Plate Mounted
- Approx. 8lbs
- Simple maintenance friendly system
Series 2
- Plate or Rack Mounted
- Adds Electronics Package
- High / Low Pressure Alarms
- Optional BIT
- Optional RS422 / ARINC-429 / Ethernet communication
- “Smart” system with integrated On-Board Computer
Series 3
- Rack Mounted Only
- Adds Color LCD Display showing:
- Compressor Condition
- Output PSI
- Output Dew Point
- Output Flow Rate
- Adds “Quick-Change” Dehydrator Cartridge