Nitrogen and Pure Air Generators and Purging Systems

Drytech has developed a range of aerospace quality nitrogen and pure air generators and purging systems.

  • To the extent that nitrogen is used in many military and aircraft ground based support (GSE) service requirements, quality of available nitrogen does not always meet minimum specifications requirements. Drytech’s Nitrogen Generator will either replace or purify the nitrogen to better than 99.5% nitrogen purity.
  • Air contains around 78% nitrogen 21% oxygen and 0.03% carbon dioxide and also small amounts of argon, methane, ozone and water vapor.

Certain anthropogenic  pollutants and particulate matter also exist.

Drytech’s Pure Air Generator system will reduce and illuminate these impurities to purity levels of better than 2 ppmv moisture and 1 ppmv CO2 with particulate down to 0.5 µm.

Please see attached general specifications sheets for Nitrogen Generator part number 1DT96000 and Pure Air Generator part number 1DT95000

Nitrogen Generator

Part Number: 1DT96000

The Drytech Nitrogen Generator is designed to utilize ambient air and convert it to pressurized, dry, contaminant free Nitrogen protecting your system against moisture and contamination. The Nitrogen Generator is a wall-mounted system used in laboratory environments, production facilities, and within field-located systems such as Wind Turbines to provide pure Nitrogen to sensitive electronics, optics systems, radar systems and even demanding hydraulic generators and gear boxes eliminating the need to service consumable filtration systems. This Nitrogen Generator eliminates the logistical requirements that so many systems demand while providing improved reliability and protection of your equipment. The Nitrogen Generator has been developed to create a constant available Pure Nitrogen source with no particulate larger than 0.24 micron. The Nitrogen Generator is configurable to accept various power inputs, and is equipped with a 1″ NPT threaded connection. Simply mount the Nitrogen Generator on the wall, and plumb your equipment to the 1″ NPT connection. Rest easy knowing a constant source of Pure Air is being supplied and never have to replace a consumable breather again.

System Specification

  • Output Pressure settable up to 30psig
  • Output Dew Point of -60°C or better
  • Max Flow Rate of 20 SLPM
  • Configurable Power Input accepting the following:
    • 110-280 VAC, 24-120 VDC, 400 Hz 3-Phase

 

Drytech Nitrogen Generator

Pure Air Generator

Part Number: 1DT95000

The Drytech Pure Air Generator is designed to utilize ambient air and convert it to pressurized, dry, contaminant free air protecting your system against moisture and contamination. The Pure Air Generator is a wall-mounted system used in laboratory environments, production facilities, and within field-located systems such as Wind Turbines to provide pure air to sensitive electronics, optics systems, radar systems and even demanding hydraulic generators and gear boxes eliminating the need to service consumable filtration systems. This Pure Air Generator el imitates the logistical requirements that so many systems demand while providing improved reliability and protection of your equipment. The Pure Air Generator has been developed to create a constant available Pure Air source of -60°C or better Dew Point, with no particulate larger than 0.24 micron. The Pure Air Generator is configurable to accept various power inputs, and is equipped with a 1″ NPT threaded connection. Simply mount the Pure Air Generator on the wall, and plumb your equipment to the 1″ NPT connection. Rest easy knowing a constant source of Pure Air is being supplied and never have to replace a consumable breather again.

System Specification

  • Output Pressure settable up to 30psig
  • Output Dew Point of -60°C or better
  • Max Flow Rate of 20 SLPM
  • Configurable Power Input accepting the following:
    • 110-280 VAC, 24-120 VDC, 400 Hz 3-Phase

Drytech Pure Air Generator